|
|
 "...and so they called A-Ball and bathed happily ever after"
|
|
|
Tubcote |
 |
PORTLAND, OREGON
---There's new life in old tubs and porcelain fixtures with TUBCOTE. This remarkable material is different from others because it's not a urethane resin. It's more resistant to scratches and is generally considered the best resurfacing kit on the market.
Recoating you porcelain fixture requires care. TUBCOTE is committed to doing it right. Perhaps the most important phpect of recoating is proper preparation of the surface. Tubcote leads you through the procedure, step-by-step. It will insure you a long and beautiful new life to your porcelain fixtures - without the "cheap" look and temporary nature of most resurfacing kits.
According to Kent Frutiger, owner of A-Ball, "This is the best kit on the market. Chuck Burchfield, who developed this solution for quality refinishing, is a craftsman who is devoted to perfecting the ultimate in quality recoating...and this is it!"
The TUBCOTE Kits
We offer you three kits and a new method for repairing chipped,
damaged and worn bathtubs. The Tubcote method will allow you to make porcelain
chip repairs as good as a professional for much less money. With Tubcote, you
will be able to refinish your old, stained, rough bathtub, instead of
tearing it out. You do not have to buy a franchise or hire a
professional at a high price. All you need is a Tubcote kit.
The Tubcote Refinishing Kit
The Tubcote Refinishing Kit was created for the refinishing of old, worn and stained bathtubs. Our Tubcote
Refinishing Kit can change your old bathtub surface to look and feel like new.
This method is easy and saves money when compared to trying to replace old
tub. Our Tubcote Refinishing Kit is only a few dollars and contains the
following items: Refinishing materials to allow a four coat application,
two seven inch roller covers, two three inch trim rollers, two poly
trim brushes, sandpaper, plastic gloves, measuring cups, and a full sheet
of detailed instructions.
Tubcote is not a complicated or technical process. If you can roll
paint on a wall, you are capable of refinishing your old tub with our Tubcote
Refinishing Kit. And think of the savings in money! Refinishing
companies usually charge from $200 to $400 for re-doing an old bathtub. In a few
hours of easy labor, you will do it for one-fourth of the cost. You
can make your tub look and feel like brand new -- and it's so easy!
Recycle that old bathtub for only a few dollars with a Tubcote
Refinishing Kit.
Chip Repair Kit
The Tubcote Chip Repair Kit was developed to help the average
individual get rid of an ugly chip or crack in bathroom fixtures. Porcelain chips
are unsightly and can rust or discolor in a short time. Painting over the
spot with white enamel is not the solution. The enamel does not fill the
chip indentation and can also flake off, resulting in an unsatisfactory
patch.
The Tubcote Chip Repair Kit solves this problem. Our method is simple
and very effective. As you can see in the photo, we include more than just
the cover material. The kit contains fill materials and the finish glaze
materials with instructions to allow the average person to make a very
professional repair. When dry, the repair looks great and really bonds
to the fixture so that it will not flake off.
A-Ball Plumbing Supply, 1703 West Burnside, has been in business in Portland for 20 years supplying fixtures for those who take an active interest in their homes. According to Frutiger, "We've become known worldwide for our unique line of original products and our ability to meet the needs of the serious bather."
We think you'll agree this is the best solution on the market. You may order TUBCOTE from ABall by phone (1-800-228-0134) or order from our
online catalog.
|
|
|
